General Electric - Lamp, Incandescent - GE387
Genuine OEM Parts
Description: Lamp, Incandescent
Part Number: GE387
Product Overview:
It serves as Indicator Lamp in Aircraft
Specification:
| Overall Length | : | 0.630" inches maximum | |
| Bulb Diameter | : | 0.230" inches maximum | |
| Filament Designation | : | C-2F | |
| Light Output Rating | : | 0.300 lumens nominal single rating | |
| Average Life Rating in Hours | : | 7000.0 Hours | |
| Filament Heavy Duty Service Rating | : | Not rated | |
| Emitted Light Characteristic | : | Colorless | |
| Light Center Length | : | 0.380" inches nominal | |
| Voltage Rating | : | 28.000 volts nominal | |
| Base Style | : | Single contact miniature flanged | |
| Bulb Style | : | T (tubular) | |
| Bulb Designator | : | T-1 3/4 | |
| Bulb Light Transmission Characteristic | : | Transparent | |
| Current Rating for Which Designed | : | 0.040 amperes nominal | |
| Burning Position | : | Any acceptable |
WARNING!!
- • DANGER! The 387 GE replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- • Do not use the 387 GE replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- • Do not touch the GE 387 bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- • Never touch the 387 GE lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- • Always turn off the electrical power before inserting, removing, or cleaning the replacement GE 387 lamp.
- • Affix the 387 GE replacement lamp securely in the socket. Improper installation of the GE 387 replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- • GE 387 replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- • Operate the GE 387 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- • Use an external fuse when required.
- • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.