LOCK WASHER - MS35333-42
Military Standard Part
Description: LOCK WASHER, Internal Tooth
Part Number: MS35333-42
Alternate Part Number: AN936A616
Product Overview
A washer which is usually round with centrally located hole. Its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. It may be made of one or two pieces.
MS35333-42 Features
| PARAMETER | CHARACTERISTICS | |
| Hole Diameter: | 0.384 inches minimum and 0.398 inches maximum | |
| Outside Diameter: | 0.670 inches minimum and 0.692 inches maximum | |
| Material Thickness: | 0.032 inches minimum and 0.040 inches maximum | |
| End Item Identification: | Mrap RG-33, A4 bradley fighting vehicle, A3 bradley fighting vehicle | |
| Hardness Rating: | 40.0 rockwell C minimum and 50.0 rockwell C maximum | |
| Material: | Steel comp overall | |
| Material Document and Classification: | 66 fed std all material responses overall | |
| Surface Treatment: | Chromate overall | |
| Surface Treatment Document and Classification: | NAS-90725 national std/spec single treatment response overall | |
| Style Designator: | Flat internal teeth |
This part is used on the following aircraft:
- •Bombardier Challenger 605
- •Bombardier Global Express
- •Textron Aviation Beechcraft Premier
- •Textron Aviation Cessna 500 Citation I-ISP
- •Textron Aviation Cessna 510 Citation Mustang
- •Textron Aviation Cessna 525 Citation Citationjet
- •Textron Aviation Cessna 680 Citation Sovereign
- •Textron Aviation Cessna 750 Citation X